Fluid Management Miller GyroMixer - Manual (Page 6)

SAFETY INFORMATION
2
Information Notice
Note: If the cabinet vibrates, loosen the locking nuts on the right
front leveling foot and slightly adjust the length.
An Information notice gives details that will assist you in efficiently using the
mixer. When you see an Information notice in this manual, know that it is there to
save you time and energy.
WARNINGS AND CAUTIONS
WARNINGS
• The paint mixer must be properly grounded to protect the operator from
possible electrical shock. Only use a 3-prong receptacle.
• Do not operate the mixer if the power cord has been cut or damaged. Keep
the cord away from open flame or heat exposure.
• Properly level the paint mixer. Improper leveling may cause severe damage
to the machine during the mixing operation.
• Always shut off the POWER lever and unplug the mixer from the AC
power outlet before servicing the paint mixer.
• Keep hands away from moving parts.
• NON-EXPLOSION MODEL
• Do not use the paint mixer near flammable liquids.
• Do not mix flammable liquids containing gasoline or toxic materials.
• Do not clean the mixer with flammable solvents.
CAUTIONS
• Always check to be sure that the containers are tightly sealed.
• Overloading can damage the paint mixer. The maximum capacity is a 125
pound solid load.
• Make sure the bail shield is properly positioned before operating the mixer.
• The mixer's sliding door must be closed to operate the mixer.
• Most containers one gallon or larger have bails. All such containers must
have the bail properly secured to prevent possible damage to the
equipment. As an option to using the bail shield, an elastic cord can be used
to achieve this purpose.