3 installing the air locker, Reinstalling the bearing caps – ARB RD166 User Manual
Page 22
Advertising
3 Installing the Air Locker
20
3.7
Reinstalling the Bearing Caps
F
Install the bearing caps oriented as they were marked before they
were removed, and tighten the bearing cap bolts. It is not
necessary to torque them down at this time.
F
Check that some clearance exists between the bearing cap and the
seal housing tube. If not, the bearing cap should be removed and
the tube re-bent for adequate clearance.
F
Tighten all bearing cap bolts with a torque wrench to the torque
VSHFLILHGLQ\RXUYHKLFOHPDQXIDFWXUHU¶VVHUYLFHPDQXDO
Advertising