ARB RD166 - Manual (Page 32)

4 Installing the Air System
30
F Screw on the outer compression nut and tighten, while supporting
WKHFHQWHUFRPSUHVVLRQQXWZLWKD´VSDQQHU7KHDLUOLQHLVQRZ
attached to the center compression nut.
NOTE : The outer compression nut will tighten against a stop.
Over tightening will not create a better seal.
F Assemble the support spring over the outside of the outer
compression nut.
F Secure any loose sections of tube with a cable tie.