Air compressor – ARB RD166 User Manual
Page 28
4 Installing the Air System
26
4.1
Mounting the Solenoid
4.1.1
Connection to an ARB Air Compressor
(Fig.16.)
F
5HPRYHRQHRIWKH´%63SOXJVIURPLWVSRUWLQWKH compressor
tank.
F
$SSO\7HIORQSDVWHWRWKHQLSSOH ´;´%63 DQGLQVHUWLWLQWR
the port and tighten.
F
Apply Teflon paste to the free end of the nipple.
F
$VVHPEOHWKHLQOHWSRUWVLGHRIWKHVROHQRLG VWDPSHGZLWKDµ¶
onto the nipple and tighten. The solenoid should be rotated into a
position that does not obstruct any other ports on the compressor
tank.
NOTE : The solenoid exhausts compressed air through the
center of the black retaining cap when the
Air Locker
is disengaged. Make sure this orifice cannot be
obstructed.
F
Apply Teflon paste to the threads of the 5mm push-in fitting and
DVVHPEOHLWLQWRWKHVROHQRLGRXWOHWSRUW VWDPSHG³´ DQGWLJKWHQ
Figure 16.
ARB
Air Compressor