ARB 3232200 - Manual (Page 11)

02-08-12 Page 11 of 23 3787827
VEHICLE PREPARATION
26. Unclip the headlight washer hose from
the nozzle and remove both the headlight
washers and the hose.
If air suspension not fitted go to step 28.
27. Cut the supplied spiral wrap in half. Wind
the spiral wrap around the two lower air
hoses that connect to the suspension
actuators.
BULL BAR SETUP
28. Fit both the right and left hand buffers to
the bar using M6 flange nuts. DO NOT
OVER TIGHTEN.
29. Fit 14 M6 cage nuts (10 into the wings
and four into the main pan) and four
nylon plugs to the bar.
Nylon plugs
M6 cage nuts