ARB 3232200 - Manual (Page 6)

02-08-12 Page 6 of 23 3787827
VEHICLE PREPARATION
1. Remove the grill and then the headlights
from the vehicle.
2. Remove the flares from the vehicle.
3. Remove the bumper bar from the vehicle.
NOTE: Be prepared to block or clamp off
the washer bottles lines to prevent water
leaking on the ground.
4. Remove the two bolts attaching the
bumper cross bar to the washer bottle.
5. On air suspension models, remove the
solenoid pack attached to the right hand
side of the crossbar.
6. Remove the crossbar from the vehicle.