ARB 3232200 - Manual (Page 20)

02-08-12 Page 20 of 23 3787827
64. Attach the washer bottle bracket without
the cage nuts to the right hand side
impact absorber using two M8 x 20mm
bolts, M8 flat and spring washers.
65. On vehicles equipped with air
suspension, attach the solenoid pack to
the bracket.
66. With the help of another person, lift the
bull bar into position and fix in place
using 3 (a side) M10 x 35mm bolts, M10
flat washers, M10 spring washers and
M10 flange nuts. Do not tighten.
67. Adjust the bar so there is approximately a
10mm gap between the bull bar wing and
the bottom of the flare. When the bar is in
the correct position tighten the bolts.
10mm gap