ARB 3232200 - Manual (Page 17)

02-08-12 Page 17 of 23 3787827
47. Remove the cir-clips from the bottom of
the vertical rollers of the fairlead and
push the pin upwards. Push the vertical
rollers inwards und using two 3/8” x 1 ¾”
bolts M10 flat and spring washers, attach
the roller fairlead to the bar.
48. Replace the circlips on the vertical rollers.
49. Insert the two rubber grommets into the
top face of bull bar.
50. Attach the control box to the control box
bracket.
51. Fit the control box to the bar with two M8
x 20mm bolts, M8 flat washers and M8
flange nuts.