ARB 3232200 - Manual (Page 22)

02-08-12 Page 22 of 23 3787827
74. Inner sensor mounting. If sensors are
activating try to rotate slightly and re-test.
Once all sensors are fitted and working
correctly apply a small amount of sensor
safe silicone to both bracket and bar to
limit movement of sensor.
75. If no winch is fitted fit fairlead cover panel
now. Insert 4 of the M10 cage nuts as
shown and secure from inside bar (winch
mounting holes) using 4 X M10 SEMS
bolts.
76. Fit the stone tray to the bar using six M6
x 20mm black bolts, M6 black flat
washers and M6 black spring washers.
M6 black bolts
M6 FASTENERS