General care and maintenance, Corporate head office – ARB 3232200 User Manual
Page 2
02-08-12
Page 2 of 22
3782929
TAKE NOTE OF THE FOLLOWING:
THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS
USING ONLY THE HARDWARE SUPPLIED.
IN THE EVENT OF DAMAGE TO ANY BULL BAR COMPONENT, CONTACT YOUR
NEAREST AUTHORISED ARB STOCKIST. REPAIRS OR MODIFICATIONS TO THE
IMPACT ABSORPTION SYSTEM MUST NOT BE ATTEMPTED.
DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN
THOSE SPECIFIED BY ARB.
DO NOT REMOVE LABELS FROM THIS BULL BAR.
THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.
Corporate Head Office
42-44 Garden St
Tel:
+61 (3) 9761 6622
Kilsyth, Victoria
Fax:
+61 (3) 9761 6807
AUSTRALIA 3137
Australian enquiries
North & South American enquiries
Other international enquiries
GENERAL CARE AND MAINTENANCE
By
choosing an ARB set of side rails, you have bought a product that is one of the most sought after 4WD
products in the world. Your side rails are a properly engineered, reliable, quality accessory that represents
excellent value. To keep your side rails in original condition it is important to care and maintain it
following these recommendations:
Prior to exposure to the weather your bar should be treated to a Canuba based polish on all exposed
surfaces. It is recommended that this is performed on a six monthly basis or following exposure to salt,
mud, sand or other contaminants.
As part of any Pre Trip Preparation, or on an annual basis, it is recommended that a thorough visual
inspection of the side rails and bull bar is carried out, making sure that all bolts and other components
are torqued to the correct specification. Also check that all wiring sheaths, connectors, and fittings are
free of damage. Replace any components as necessary. This service can be performed by your local
authorized ARB Stockist.