Brother HE-800A - Manual (Page 42)

HE-800A
5. OPERATION
34
Example 2: How to set a taper tack for the front tack pattern and an eyelet for the rear tack pattern to program number
10.
First, set parameter number 01 to "buttonhole
stitch (free) setting value 0".
1. Press the SELECT key (1) to change the mode to
automatic, test feed or manual mode.
2. Press the program No. keys (2) and (3) to select the
program number 10, and then press the ENTER
key (4).
3. Press the SELECT key (1) to change the mode to
program mode.
4. Press the program No. keys (2) and (3) to select the
parameter number 01.
5. Press the parameter keys (5) and (6) to select the
parameter setting value 0, and then press the
ENTER key (4).
Next, set parameter number 20 to "Taper tack
setting value 4".
6. Press the program No. keys (2) and (3) to select the
parameter number 20.
7. Press the parameter keys (5) and (6) to select the
parameter setting value 4, and then press the
ENTER key (4).
Next, set parameter number 30 to "Eyelet setting
value 3".
8. Press the program No. keys (2) and (3) to select the
parameter number 30.
9. Press the parameter keys (5) and (6) to select the
parameter setting value 3, and then press the
ENTER key (4).
An eyelet taper-tack buttonhole has now been set
for program No. 10.
10. Press the SELECT key (1) to change the mode to
automatic mode.
3912Q
3913Q
3914Q
3915Q