Brother HE-800A - Manual (Page 87)

HE-800A
11. CHANGING FUNCTIONS USING THE MEMORY SWITCHES
79
ውው-ው. Memory switch table
The memory switch settings are effective for all programs.
No. Setting items Setting range Unit Default
00. Cutter power -1: Light
0: Light - Normal
1: Normal
2: Normal - Medium
3: Medium
4: Heavy
1 1
02. Work clamp lifting speed -4 - 4 1 0
03. Work clamp lowering speed -4 - 4 1 0
04. Work clamp height when treadle is
depressed backward 1 - 13mm 1 13
05. Work clamp height at neutral
position 1 - 13mm 1 10
06. Soft press height OFF, 0.1 - 8.0mm 0.1 OFF
07. (*1) Threshold value correction when
work clamp is lifted
-10 - 10 1 0
08. (*1) Threshold value correction when
work clamp is lowered
-10 - 10 1 0
09. (*1) Threshold value correction at start -10 – 10 1 0
10. Extension time for continuous
sewing OFF, 100 – 1,000ms 100 OFF
11. Home position return cycle OFF, 1 – 10 1 1
12. Feed timing -10 – 10 ( x 0.24 q) 1 0
13. Cutter dimension display during
automatic mode ON: Cutter dimensions are displayed.
OFF: Production counter or bobbin
thread counter is displayed.
- OFF
14. Program number changing enabled
when program lock is set ON: Program numbers can be
changed and the programmer
can be started.
OFF: Program numbers cannot be
changed and the programmer
cannot be started.
- OFF
15. Preventing the zigzag speed from
being changed ON: Changes are prevented
OFF: Changes are allowed - OFF
16. Upper thread tension when sewing
underlays ON: Strong (zigzag tension discs close)
OFF: Weak (zigzag tension discs open) - OFF
17. (*2) Checking the needle up stop
position after sewing
ON: No
OFF: Yes - OFF
(*1)… Memory switch No. 07. 08. 09.
(*2)… When memory switch No. 17 is set to ON, error code E-62 may be displayed. If this happens, check the entry for
error code E-62 in “14. Error code table”.
2188Q
Work clamp raised
ON position
No. 07.
Neutral position
Work clamp lowered ON position
Machine start ON position
No. 09.
No. 08.