Brother HE-800A - Manual (Page 47)

HE-800A
5. OPERATION
39
No. Setting items Setting range Unit Default
Front tack pattern 20
Rectangle Radial Round Tack Taper tack
0: Rectangle
1: Radial
2: Round
3: Tack
4: Taper tack 1 0
Front tack length (except taper tack) 21 0.5 - 5.0mm 0.1 1.0
Front tack pitch (except radial) 22 0.05 - 1.00mm 0.05 0.30
Front tack width correction (except radial) 23 -2.0 - 2.0mm 0.1 0.0
No. of front tack stitch (radial) 24 5 - 11 stitches 2 7
Taper tack length (taper tack) 25 1.0 - 5.0mm 0.1 3.0
Front tack sideways correction (rectangle only) 26 -1.0 - 1.0mm 0.1 0.0