Brother HE-800A - Manual (Page 60)

HE-800A
5. OPERATION
52
ዑ-ውዌ. Production counter
Check that panel DIP switch A - No.4 is at the OFF setting. (Refer to “13. CHANGING FUNCTIONS USING THE DIP
SWITCHES”.)
1. Press the SELECT key (1) to change the mode to automatic mode.
2. Press the parameter keys (2) and (3) simultaneously.
* "PC" will flash in the program number LED (4), and the production counter value will appear in the parameter
display LED (5).
3. Press the parameter keys (2) and (3) to change the production counter setting.
* The production counter setting will flash while the setting is being changed.
4. Press the ENTER key (7). The production counter value will be accepted and the mode will return to automatic
mode.
* If you press the SELECT key (1) while the production counter value is still flashing, the mode will return to
automatic mode without the production counter value being changed.
If you would like to set the production counter to "0", press the RESET key (6).
3941Q