Brother HE-800A - Manual (Page 90)

HE-800A
13. CHANGING FUNCTIONS USING THE DIP SWITCHES
82
DIP switch B
No. ON/OFF Setting items Default
ON -
1
OFF -
OFF
ON -
2
OFF -
OFF
ON
ޔONޔON Panel DIP switches B - No. 7 and No. 8 are enabled.
ON
ޔONޔOFF Work clamp size: 7.3 u 36.0 mm (Sewing area: 6.0 u 32.0 mm)
ON ޔOFFޔON Work clamp size: 7.3 u 24.5 mm (Sewing area: 6.0 u 20.0 mm)
ON ޔOFFޔOFF Work clamp size: 6.8 u 36.0 mm (Sewing area: 5.4 u 32.0 mm)
OFF
ޔONޔON Work clamp size: 6.8 u 24.5 mm (Sewing area: 5.4 u 20.0 mm)
OFF
ޔONޔOFF Panel DIP switches B - No. 7 and No. 8 are enabled.
OFF
ޔOFFޔON Work clamp size: 5.4 u 19.0 mm (Sewing area: 4.0 u 15.0 mm)
3
ޔ4ޔ5
OFF ޔOFFޔOFF Panel DIP switches B - No. 7 and No. 8 are enabled.
OFF
ޔOFFޔOFF
ON
Needle plate size: 5.4 mm
(Max. needle zigzag feed width = 4.0 mm)
6
OFF
Needle plate size: 7.3 mm
(Max. needle zigzag feed width = 6.0 mm)
OFF
ON
ޔON
Work clamp size: 7.3
u 47.0 mm (Sewing area: 6.0 u 40.0 mm)
ON ޔOFF Work clamp size: 6.8 u 47.0 mm (Sewing area: 5.4 u 40.0 mm)
OFF ޔON Work clamp size: 5.4 u 24.5 mm (Sewing area: 4.0 u 20.0 mm)
7
ޔ8
OFF
ޔOFF
Work clamp size: 5.4
u 36.0 mm (Sewing area: 4.0 u 32.0 mm)
OFF
ޔOFF
* If the programs are initialized when Nos. 3, 4 and 5 are set to OFF, OFF and ON respectively, the initial value for
parameter No. 02 - Cutter size will be set to 6.0 mm. (Normal default value is 13.0 mm.)