Lukas SP 512 - Manual (Page 18)

18
7.3 Pulling
7.4 Peeling
- LUKAS chain sets are to be used for pulling purposes.
- Before the pulling process can be performed, ensure that the bolt and hook fi t correctly to
prevent the chain from slipping.
- Only chain sets in perfect condition may be used.
- The pull chains are to be inspected at least once per year by an expert.
- See separate operating instructions for the relevant chain set!
SP 310 / SP 510 SP 512
Mounting bore for
chain set
Peeling zone
With the integrated peeling zone (see fi gure
below) in the tool tips of spreaders SP 310, SP
510 and SP 512, sheet steels can be peeled
open (for maximum sheet steel thickness t, see
chapter “Technical data”).
WARNING / CAUTION!
Splinters can fl y uncontrollably from particularly hard materials.
Keep a safe distance!
SP 300
Mounting bore for
chain set