Lukas SP 512 - Manual (Page 6)

6
In the event of malfunctions,
immediately deactivate the
equipment and secure it. The
malfunction is to be repaired
immediately. Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining the prior approval of
LUKAS.
Observe all safety and danger
notes on the equipment and
in the operating instructions. All safety and danger notes
on the equipment are to be
kept complete in a legible
condition.
Any mode of operation which
impairs safety and/or stability
of the equipment is forbidden! Comply with all specifi ed
dates or dates specifi ed in
the operating instructions
pertaining to regular controls /
inspections on the equipment.
Safety devices may never be
deactivated! The maximum permitted
operating pressure noted on
the equipment must not be
exceeded.
Before the equipment is
switched on/started up, and
during its operation, it must
be ensured that nobody is
endangered by the operation
of the equipment. Only original LUKAS
accessories and spare parts
may be used for repairs.
Please ensure that, when
working with this equipment
or during transportation of
such, you don’t get stuck in
the looped hoses and trip.
When working close to live
components and cables,
suitable measures must
be taken to avoid current
transfers or high-voltage
transfers to the equipment. Please note that, when
spreading, tearing or breaking
can cause falling material, or
sudden removal of such can
cause it to suddenly catapult
off: necessary precautions
need to be taken.
The build-up of static
charge with the potential
consequence of spark
formation is to be avoided
when handling the equipment. Only touch any broken-off
parts wearing protective
gloves, since the torn edges
can be very sharp.