Lukas SP 512 - Manual (Page 28)

28
5. Drive the pins “F” out with a drift and remove
the plug-on tips “G”. Remove the locking
rings “H” and remove the handlebars “J”.
6. The pins “L” can be removed after removing
the locking rings “K”. You can now remove
the spreader arms “M” and replace them.
NOTE:
The torque required can be taken from the spare parts list of your particular
unit.
CAUTION!
Don’t forget to apply LUKAS special grease to all sliding surfaces.
7. The work steps must be carried out in reverse order to fi t the new parts.
H J J F
J
H
G
K L L
K
M
M