Lukas SP 512 - Manual (Page 25)

25
10.3.2 Replacing the plug-on tips (SP 300 / SP 310)
Procedure:
1. In order to remove the plug-on tips “G”, you need to push the buttons “J” on both sides of
a spreader arm completely and simultaneously and then remove the plug-on tip from the
spreader arm by pulling it forwards.
2. Place the new tips onto the arm until they automatically click in place on the spreader
arm.
H
G
J
H J
NOTE:
Always replace both plug-on tips.
When inserting the new tips, push both buttons “J” until the tip can be slid over
them.
After fi tting, make sure that both buttons “J” are locked on each arm (that they
are back in their original position).
G