Lukas SP 512 - Manual (Page 37)

37
If it isn’t possible to rectify the malfunctions, inform an authorised LUKAS dealer or the
LUKAS customer service department immediately!
The address for the LUKAS customer service department is:
LUKAS
Hydraulik GmbH
Weinstraße 39, D-91058 Erlangen
Tel.: (+49) 09131 / 698 - 348
Fax.: (+49) 09131 / 698 - 353
Trouble Control Cause Solution
Especially by usage
of mono-couplings:
Leak on the handhold check the
connections of the
hoses hose connection
to the couplings
interchanged reconnect the hoses
to the coupling in the
right way
Returnline
disabled disconnect the
returnline from the
coupling, clean it and
reconnect it.
with mono-coupling-
system: Leak in the
couplings Is the coupling
damaged? coupling damaged Coupling must be
replaced immediately
with quick-
disconnect-coupling-
system: Leak in the
couplings Is the coupling
damaged? coupling damaged Coupling must be
replaced immediately
Is the leak only on
the coupling male? Safety valve
reacted After pressure
release there is no
more leakage.
12. Technical data
Since all values are subject to tolerances, minor differences may occur between the data on
your equipment and the data in the following schedules!
NOTE:
The following tables contain only the technical data required for standard
acceptance.
Additional data concerning your unit can be obtained from LUKAS on request.