4 oscillation / vibration – Lukas SP 512 User Manual
Page 42
![background image](/manuals/548871/42/background.png)
42
12.1 Peeling
12.2 Recommended hydraulic fl uid
12.3 Operating and storage temperature ranges
CAUTION!
Before using hydraulic fl uids, which do not correspond to the above-mentioned
specifi cations and/or are not purchased from LUKAS, you have to contact
LUKAS itself!
Type
SP 310
SP 510
SP 512
max. sheet steel
thickness “t”
[mm]
4
5
5
[in.]
0.16
0.20
0.20
max. possible
peeling length
[mm]
520
650
500
[in..]
20.47
25.59
19.69
Hydraulic fl uid for LUKAS hydraulic equipment:
Mineral oil DIN ISO 6743-4 and others
Oil temperature range
Oil code
Viscosity rating
Remarks
A
-20 .... +55°C
HM 10
VG 10
-4.0 .... +131°F
recommended viscosity range: 10...200 mm²/s
(10…200 cSt.)
Supplied with HM 10 DIN ISO 6743-4.
Operating temperature
[°C] /
[°F]
-20 … +55
-4 …
+131
Ambient temperature
(device in operation)
[°C] /
[°F]
-25 … +45
-13 …
+113
Storage temperature
(device not in operation)
[°C] /
[°F]
-30 … +60
-22 …
+140
The total oscillation value / vibration value to which the upper limbs are exposed, is usually
below 2.5 m/s².
Higher values may be measured for short periods as a result of interaction with the materials
to be processed.
12.4 Oscillation / vibration