JLG 15/20MSP Service Manual - Manual (Page 89)

SECTION 4 - CONTROL COMPONENTS
3121231 – JLG Lift – 4-33
Transducer Sensor Installation (Typical)
1. Mounting Screws (a) 4. DO NOT Pressure Wash Decal
2. Bushings 5. Sensor Side Deflector
3. Transducer Sensor (b)
Notes: (a) Apply Loctite 222 to screw threads and torque to
15 in. lb.
(b) Mount sensor with (circular) membrane
facing down.
Secure Transducer Sensor Wiring
1. Nylon Tie Wraps (a) 2. Platform Floor Supports
Note:(a)Secure ALL sensor wire cables to platform side
frame.
1
3
4
5
2
2
1
2
Sensor Side Deflectors
1. Sensor Side Deflector (a) 3. Platform Side Frame
2. Pop Rivet
Note: (a) One deflector required on each side of platform.
Deflector must be even with, and not extend inside
of the platform side frame.
1
2
3