Tool use - angled style fittings, Tool use - angled style fittings -8 – JLG 15/20MSP Service Manual User Manual
Page 98
Advertising

SECTION 5 - MAST COMPONENTS
5-8
– JLG Lift –
3121231
Tool Use - In-Line Style Fittings (continued)
Tool Use - Angled Style Fittings
Step 4. Gently push hose assembly into coupling
body (see directional arrow).
Step 5. Maintaining slight pressure on the hose
assembly, actuate the tool (see arrow).
Step 6. Release the tool and pull on hose assembly
to complete disconnection.
Step 1. Prior to disconnection, ensure that system
is not under pressure.
Step 2. Pull on hose assembly to create a gap
between the dust boot and hose fitting
shoulder.
Step 3. Insert the disconnect tool in the gap created
between the dust boot and hose fitting
shoulder.
Advertising
This manual is related to the following products: