JLG LiftPOD FS80 (1001070451) - Manual (Page 27)

SECTION 2 - PREPARATION AND INSPECTION
1-877-254-3876 LIFTPOD by JLG 1001070451
1-877-2-LIFTPOD www.liftpod.com 2-9
Tool Tray Pre-Start Inspection
Prior to use of the tool tray, check the following:
• Tool tray is seated securely on the platform rail.
• No cracks or bends in tray.
• Both of the clips are securely attached to the platform rail
(Figure 2-9.).
• Capacity decal is in place and legible.
Maximum Load: The maximum permissible load on the tool tray
is 15kg (33 lb.) evenly distributed.
Figure 2-9. Tool tray installation
FS.book Page 9 Tuesday, May 10, 2011 3:15 PM