JLG LiftPOD FS80 (1001070451) - Manual (Page 36)

SECTION 3 - MACHINE OPERATION
1001070451 LIFTPOD by JLG 1-877-254-3876
3-8 www.liftpod.com 1-877-2-LIFTPOD
NOTE: When reversing the procedure to disassemble the
machine, pull the platform latch handle ( C) to disengage
the platform from the carriage.
7. Fasten lanyard securely around the handle of the cord-
less drill. Attach the cordless drill to the top of the drive-
shaft, either using the supplied 7/16 (11mm) deep well
drive socket (located in manual pouch), or by tightening
the drill chuck directly to the hexagon on top of the
driveshaft (see Figure 3-11.).
CORDLESS DRILL LANYARD MUST BE INSTALLED BEFORE ELEVATING.
DO NOT DROP DRILL.
Figure 3-11. Cordless drill installation
Driveshaft
Drive Socket
Lanyard
Cordless Drill
(optional)
Manual Pouch
FS.book Page 8 Tuesday, May 10, 2011 3:15 PM