Omega lite installation manual – 2N Omega Lite - Installation Manual v1.5 User Manual
Page 47
2N
®
- OMEGA Lite
Installation manual
Installation manual
47
11. Content
of expansion set
2N
®
Omega 48 expansion set contains:
- Plastic cover
- Mechanics of expansion deck
- Data cable
- Power cable
- Earth-wire
- Instalation CD
- Screws
11.1. Expansion deck instalation
1. Switch off PbX 2N
®
Omega Lite.
2. Remove plastic shell from the PbX.
3. Unmount display connector from bacic module (J17).
4. Screw off display holder. Access to two screws is in middle of the top part of
chassis.
5. Unmount the display from the holder. It is recomended to use thin nose pliers.
6. Put the expansion deck mechanics onto basic chassis so that fastenning
holes on side of the mechanics match with M3 nuts on the chassis (the top-
right and top-left side) – according to scheme.