2N Omega Lite - Installation Manual v1.5 - Manual (Page 7)

2N
®
- OMEGA Lite
Installation manual
Installation manual
7
www.2n.cz
Description of parts of basic module
2. Description of mechanical parts
2.1. Base (chassis)
The base carries the other parts. The power supply (plug 230V/AC + power
switch) is mounted in the upper right part. The upper left + lower left part is intended
for fitting the extender. The strip with holes in the bottom part is intended for fitting
serial and blanking platelets. The display is fixed in the upper part in the centre.