5 auto provisioning – 2N Helios IP Configuration Manual v2.8.1 User Manual
Page 104
104
a.
b.
c.
a.
b.
c.
d.
e.
f.
g.
5.5.5 Auto Provisioning
The
intercoms help you update firmware and configuration manually,
2N Helios IP
®
or automatically from a storage on a TFTP/HTTP server selected by you according to
predefined rules.
You can configure the TFTP and HTTP server address manually. The
int
2N Helios IP
®
ercoms support automatic identification of the local DHCP server address (Option 66).
Firmware
Use the
tab to set automatic firmware download from a server defined by
Firmware
you. The intercom compares the server file with its current firmware file periodically
and, if the server file is later, automatically updates firmware and gets restarted
(approx. 30 s). Hence, we recommend you to update when the intercom traffic is very
low (at night, e.g.).
expects the following files:
2N Helios IP
®
hip
-firmware.bin – intercom firmware
MODEL
hip
-common.xml – common configuration for all intercoms of one
MODEL
model
hip
-
.xml – specific configuration for one intercom
MODEL MACADDR
MODEL in the filename specifies the intercom model:
v – 2N Helios IP Vario
®
f – 2N Helios IP Force
®
sf – 2N Helios IP Safety
®
u – 2N Helios IP Uni
®
ak – 2N Helios IP Audio Kit
®
vk – 2N Helios IP Video Kit
®
ve – 2N Helios IP Verso
®
MACADDR is the MAC address of the intercom in the 00-00-00-00-00-00 format. Find
the MAC address on the intercom production plate or in the
tab via
Intercom Status
the web interface.
Example: