6 display, List of parameters – 2N Helios IP Configuration Manual v2.8.1 User Manual
Page 50
50
5.3.6 Display
Some
models are equipped with a colour display. Configure the
2N Helios IP Vario
®
display exclusively via the
. In this menu, you can only switch
2N Helios IP Manager
®
the display on/off and set a few parameters.
List of Parameters
Display enabled – enable/disable the display function.
Ad screen activation timeout – set the maximum idle time (i.e. time during
which the user does not control the device using the buttons or numeric keypad)
after which the advertisement displaying mode is switched on automatically.
Quick dial screen activation timeout – set the maximum idle time (i.e. time
during which the user does not control the device using the buttons or numeric
keypad) after which the Phone Book is switched into the nametag displaying
mode.
Phone Book search mode – set the Phone Book searching mode. You can
search users either according to the first username characters (Prefix only) or an
arbitrary incidence of the selected characters in the username (Arbitrary