Card reader module configuration, I/o module configuration – 2N Helios IP Configuration Manual v2.8.1 User Manual
Page 58
Advertising
58
Card Reader Module Configuration
Associated switch – set the number of the switch to be activated by tapping of
a valid RFID card
.
Forward to Wiegand output - set a group of Wiegand outputs to which all the
received RFID card IDs will be resent
.
I/O Module Configuration
Module name – set the module name for input/output specification in the
SetOutput, GetInput and InputChanged objects in
.
2N Helios IP Automation
®
Advertising