2N Helios IP Configuration Manual v2.8.1 User Manual
Page 89
89
Password – set the intercom access password. Press
to change the
password. The 8-character password must include one lower-case letter, one
upper-case letter and one digit at least.
HTTP port – set the web server port for HTTP communication. The port setting
will not be applied until the intercom gets restarted.
HTTPS port – set the web server port for HTTPS communication. The port
setting will not be applied until the intercom gets restarted.
HTTPS user certificate – specify the user certificate and private key for the
intercom HTTP server – user web browser communication encryption. Choose
one of the three sets of user certificates and private keys (refer to the
Certificates subsection) or keep the
setting, in which the certificate
SelfSigned
automatically generated upon the first intercom power up is used.
Remote access enabled – enable remote access to the intercom web server
from off-LAN IP addresses.
Original language –
download the original file containing all the user interface
texts in English. The file format is XML; see below.
User language –
record, load and remove, if necessary, a user file containing
your own user interface text translations.