2N Helios IP Configuration Manual v2.8.1 - Manual (Page 31)

31
2N TELEKOMUNIKACE a.s., www.2n.cz
®
the . Double-click to select the card ID and push CTRL+C. Now that you have Records
the card ID in your box, you can insert it with CTRL+V in any intercom setting field.
Having been read, the card ID is compared with the intercom card database. If the
card ID matches any of the cards in the database, the appropriate action will be
executed: switch activation (door unlocking, etc.). To change the switch number to be
activated, use the
parameter in the m Associated Switch Hardware Card Reader /
enu ( models) or the parame 2N Helios IP Vario, Force, Safety
®
Associated Switch
ter in the menu of the card reader module ( Hardware Modules / 2N Helios IP
®
model). Verso
Refer to the
menu for the access card settings. Directory Access Cards /
List of Parameters
Cards
Plus card ID – enter the service card ID for adding cards to the Installed cards:
a sequence of 6–16 characters including 0–9, A–F.
Minus card ID – enter the service card ID for removing cards from the Installed
cards: a sequence of 6–16 characters including 0–9, A–F.
Card ID – enter the access card ID: a sequence of 6–16 characters including
0–9, A–F.
Time profile – assign a time profile to the user access card to define the card
validity. If the time profile is inactive, the user access card will be detected as
invalid.
Description – enter such information as the card owner name and similar. The
description gets displayed in the
menu whenever the card is applied Records