2N Helios IP Configuration Manual v2.8.1 User Manual
Page 72
Advertising
72
a.
b.
c.
Set the video stream (video codec type, image resolution, frame rate and bit rate)
parameters in the
section.
Video
Or, use the following RTSP Uri and choose a codec type other than the currently set
one:
rtsp://ip_intercom_address/h264_stream
rtsp://ip_intercom_address/mpeg_stream
rtsp://ip_intercom_address/mjpeg_stream
RTSP server enabled – enable the RTSP server function in the intercom.
Audio stream enabled – enable offering of audio stream while establishing
connection with the RTSP server.
Video stream enabled – enable offering of video stream while establishing
connection with the RTSP server.
Video codec – set the default video codec for RTSP streaming.
Advertising