2N Helios IP Configuration Manual v2.8.1 User Manual
Page 80
80
Server address – set the SMTP server address to which E-mails shall be sent.
Server port – specify the SMTP server port. Modify the value only if the SMTP
server setting is substandard. The typical SMTP port value is 25.
Username – enter a valid username for login if the SMTP server requires
authentication, or leave the field empty if not.
Password – enter the SMTP server login password.
User certificate – specify the user certificate and private key for the intercom –
SMTP server communication encryption. Choose one of the three sets of user
certificates and private keys (refer to the Certificates subs.) or keep the Self
setting, in which the certificate automatically generated upon the first
Signed
intercom power up is used.
Deliver in – set the time limit for delivering an E-mail to an inaccessible SMTP
server.
Click
to send a testing E-mail to the defined address with the aim to test
Apply & Test
the functionality of the current E-mail sending setting. Complete the E-mail destination
address in the
. The current E-mail sending
dialogue window displayed after the click
state is continuously displayed in the dialogue window for you to detect an E-mail
setting problem if any on the intercom or another network element.