2N Helios IP Configuration manual v2.6 - Manual (Page 100)

100
2N TELEKOMUNIKACE a.s., www.2n.cz
®
the intercom model.
At boot time – enable check and, if possible, update execution upon every
intercom start.
Update period – set the update period: hourly, daily, weekly and monthly.
Update at – set the update time in the HH:MM format for periodical updating at
a low-traffic time. The parameter is not applied if the update period is set to a
value shorter than 1 day.
Next update at – set the next update time.