2N Helios IP Configuration manual v2.6 - Manual (Page 62)

62
2N TELEKOMUNIKACE a.s., www.2n.cz
®
phone, in the login window and web interface start page.
Phone number (ID) – set the intercom phone number (or another unique ID
including characters and digits). Together with the domain, this number
represents a unique intercom identification in calls and registration.
Domain – set the domain name of the service with which the intercom is
registered. Typically, it is identical with the SIP Proxy or Registrar address.
Use authentication ID – enable the use of an alternative ID for intercom
authentication. If disabled, the phone number defined above is used for
authentication.
Authentication ID – enter the alternative ID for authentication.
Password – enter the password for authentication. The parameter is applied on
if your PBX requires authentication.
Proxy address – set the SIP Proxy IP address or domain name.
Proxy port – set the SIP Proxy port (typically 5060).
Registration enabled – enable intercom registration with the set SIP Registrar.
Registrar address – set the SIP Registrar IP address or domain name.
Registrar port – set the SIP Registrar port (typically 5060).
Registration expires – define the registration expiry, which affects the network
and SIP Registrar load by periodically sent registration requirements. The SIP
Registrar can modify the expiry limit without letting you know.