2N Helios IP Configuration manual v2.6 - Manual (Page 57)

57
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Card Reader Module Configuration
Associated switch – set the number of the switch to be activated by tapping of
a valid RFID card
.
Forward to Wiegand output - set a group of Wiegand outputs to which all the
received RFID card IDs will be resent
.
I/O Module Configuration
Module name – set the module name for input/output specification in the
SetOutput, GetInput and InputChanged objects in
. 2N Helios IP Automation
®
Wiegand Module Configuration
The Wiegand module is equipped with the input and output , which Wiegand interfaces
are mutually independent, have separate settings and can receive and send codes at
the same time. The Wiegand input helps you connect such equipment as RFID card
readers, biometric readers and so on. With the Wiegand output, you can connect the