Voip parameters – 2N VoiceBlue Next v3.6 User Manual

Page 47

Advertising
background image

47

2N TELEKOMUNIKACE a.s., www.2n.cz

®

End of dialling (empty=off) – a selectable DTMF code for DTMF dialling end in the
event of a DISA incoming call. The default value is '#'.

VoIP parameters

VoIP functions

Day of deleting statistics on VoIP (every month) – the day of automatic deletion
of call statistics on the VoIP interface. None = no deletion.

SIP protocol settings

Use CLIP from INVITE field – the CLIP as set in the

or

field will be

Contact

From

used for routing calls into GSM/UMTS networks.
Send 180 ringing instead of 183 session progress.
Send 200 OK instead of 180/183.
Send 200 OK and BYE when rejected from GSM.
Send 200 OK on REGISTER request – virtual registration of the device in 2N

®

(necessary for registration-requiring equipment).

VoiceBlue Next
Replace CLIP from GSM with Caller ID.
Deny DTMF according to RFC2833.
Forward DTMF for ME (Mobility Extension).

SIP registration

Registration expires [s] – the timeout after which the 2N VoiceBlue Next

®

registration data expire at the SIP Proxy.
Reattempt registration [s] – time interval for re-sending the request.
Registration domain (realm).
Caller ID.
Username – registration data for the SIP Proxy.
Password – registration data for the SIP Proxy.

Voice parameters

First RTP port (even: 1024 – 65524) – number of the first RTP port. The number
must be even as recommended.
Last RTP port (even: first RTP+10 – 65534) – number of the last RTP port. The
number must be even as recommended. The recommended minimum range of
RTP ports should be 10.

Codec settings

detailed codec settings (G.711a/u, or G.729).

Codec priority

preferential speech codec setting:

Priority 1
Priority 2
Priority 3

Advertising