Smtp/pop3 basic configuration – step by step – 2N VoiceBlue Next v3.6 User Manual
Page 71
71
1.
a.
b.
2.
a.
b.
c.
3.
a.
SMTP/POP3 Basic Configuration – Step by Step
This section helps you define the
basic parameters for SMS
2N VoiceBlue NEXT
®
sending/receiving via SMTP/POP3. Read the
subsection carefully before
setting details.
shows sending/receving SMS via SMTP/POP3. Having created user accounts
Figure 1
in
, the users can access the accounts via the e-mail client and
2N VoiceBlue NEXT
®
send SMS messages to
via SMTP. The gateway receives the
2N VoiceBlue NEXT
®
messages and resends them to the GSM users according to the predefined routing
rules. A message coming to
from GSM is routed according to
2N
VoiceBlue NEXT
®
the incoming SMS rules and delivered to the user via POP3.
SMTP/POP3 Communication
Figure 1:
Take the following basic steps in
to enable SMS
2N VoiceBlue NEXT
®
sending/receiving:
In the
menu:
Messaging SMS grouping
Assign the selected GSM modules to the SMS groups (according to the GSM
provider and SIM cards with identical tariffs, for example).
Assign the SMS groups created in step 1.a above to the User groups if you
use messaging with different routing rules to different company
departments, for example.
Add users in the
menu:
Messaging Users Add
Assign the user to a
.
User group
Set
.
Access type: Email(SMTP/POP3)
Define the
and
to log in to the
Login name (without domain)
Password
SMS server via your e-mail client.
Set the Domain in the Messaging User Group General settings Email
menu.
settings Domain
Set the user domain. The domain is automatically assigned to the user
name in the selected User group and represents the user e-mail address.
Example: Suppose a user was created in step 2.c with Login name: USER
Note
You can send an SMS message of any length to up to 100 users at the
same time from the e-mail client. The maximum SMS count per e-mail is
only limited by the
User group
General settings SMTP
Maximum
settings.
SMS per email