8 tracing – 2N VoiceBlue Next v3.6 User Manual
2N VoiceBlue Next
allows for operation tracing (VoIP, SIP, GSM). Tracing is
accessible in one session only at a time, the other tracing requests are rejected with
BUSY. With regard to a rather extensive volume of data, we recommend that the
function should be activated before tracing. Any
Write communication into file
Telnet–supporting terminal (HyperTerminal, Putty, etc.) can be used.
AT%S92=x – Description AT%S92=x Set the tracing details. Refer to the table
below for value X
AT!R2 – Start tracing via the active session
Any character – Terminate tracing
Layer 3 and 4 Status
Layer 2 Status
The resultant value X is a sum of the required functions (X= timestamps+LCR = 16+2
= 18, e.g.).
You are advised to synchronise your GSM gateway with the SIP Proxy, or
a PC before tracing.