Gsm incoming groups – 2N VoiceBlue MAX v1.3 User Manual

Page 55

Advertising
background image

55

2N TELEKOMUNIKACE a.s., www.2n.cz

®

GSM Incoming Groups

2N VoiceBlue MAX

®

allows you to work with two groups of incoming calls for each of

which you can set variable connection set-up modes.

General settings

Mode – set how the gateway should process incoming GSM calls:
Minimum digits in DTMF – set the minimum count of digits to be required by the
gateway for DTMF dial-in.

Reject incoming calls – all incoming GSM calls are automatically rejected.
Ignore incoming calls – all incoming GSM calls are ignored. The calling
subscriber gets the check ringing tone.
Accept incoming calls + voice message – incoming GSM calls are received
and, if preset so, the DTMF dial-in with a voice welcome note is activated.
Accept incoming calls + dialtone – incoming GSM calls are received and, if
preset so, the DTMF dial-in function with a simulated secondary dialtone is
activated.
CallBack after ring / Reject – in case the CallBack table includes the CLIP, a
CallBack is made. CLIP–less incoming calls are rejected.
CallBack after ring / Ignore – in case the CallBack table includes the CLIP, a
CallBack is made. CLIP–less incoming calls are ignored.
Report to PC + voice message – the GSM gateway sends information on
incoming calls to a PC equipped with the call routing software. The DTMF
dial-in with a voice welcome note can be activated for incoming calls.
Report to PC + dialtone – the GSM gateway sends information on incoming
calls to a PC equipped with the call routing software. The DTMF dial-in with
a simulated secondary dialtone can be activated for incoming calls.

Maximum digits in DTMF – set the minimum count of digits to be accepted by the
gateway for DTMF dial-in.

DTMF dialling timeout [s] – set the time for the GSM gateway to wait for the first
/ next DTMF digits. If you set this parameter to 0, the incoming call is
automatically connected to the numbers included in the

.

List of called numbers

Day of deleting GSM incl. group statistics – define a day in a month on which the
statistics on incoming calls should be deleted.

Prefix before DISA dial-in – enter a numerical prefix to be automatically inserted
before the DTMF dial-in.

CLIP – use this parameter to modify the CLIP from GSM/UMTS networks. '+' is
removed automatically from international identifiers. Use '–' to remove a digit.
Examples (GSM CLIP +420600123456):

Parameter

CLIP to VoIP/PRI
1

Note

Null

420261301500

No CLIP change

+

+420261301500

+ inserted before CLIP received

00

00420261301500 00 inserted before CLIP received

0261301500

First two digits removed from CLIP received

–––99

99261301500

First three digits removed from CLIP received, prefix
'99' added

Looping of voice message – set the voice message playing time.

Advertising