Smpp basic configuration – step by step – 2N VoiceBlue MAX v1.3 User Manual

Page 69

Advertising
background image

69

2N TELEKOMUNIKACE a.s., www.2n.cz

®

1.

a.

b.

2.

a.
b.

c.

d.

3.

a.

b.

SMPP Basic Configuration – Step by Step

This section helps you define the basic parameters for SMS sending/receiving via SMPP
in

. Read the

subsection carefully before setting

2N VoiceBlue MAX

®

Messaging

details.

shows sending/receiving SMS via SMPP. Having created user accounts in

Figure 1

2N

, the users can send/receive SMS via SMPP. The figure shows an

VoiceBlue MAX

®

example with two SMSC accounts created in

(to the right).

2N VoiceBlue MAX

®

Another

(ESME) gateway and a PC on which the SMPP (ESME)

2N VoiceBlue MAX

®

application is running are connected to these accounts via SMPP. An SMS coming to 2N

via SMPP is routed according to the gateway outgoing routing rules

VoiceBlue MAX

®

and sent to GSM. An SMS coming from GSM is routed according to the gateway
incoming routing rules and sent to the destination via SMPP.

SMPP Communication

Figure 1:

Take the following basic steps in

to enable SMS

2N VoiceBlue MAX

®

sending/receiving:

In the

menu:

Messaging SMS grouping

Assign the selected GSM modules to the SMS groups (according to the GSM
provider and SIM cards with identical tariffs, for example).
Assign the SMS groups created in step 1.a above to the User groups if you
use messaging with different routing rules to different company
departments, for example.

Add users in the

menu:

Messaging Users Add

Assign the user to a

.

User group

Set Access type: SMPP (SMSC).
Set

and

to access the GSM gateway SMS server via

System ID

Password

ESME.
Set

.

TCP type: server

Create the incoming SMS routing rules in the Messaging User Group General

menu:

settings Incoming SMS routing Add

Select the group to receive the SMS via the Message from SMS group
menu.
Select the

to define how to process incoming SMS. Example:

Action type

Advertising