Brother HL-3260N - Manual (Page 133)

4-10
☛ ☛ ☛ ☛ 13.
Attach cover 1
①and secure it to the printer with the screws ➁.
1
2
ZAEP671E
Fig. 4-14
✒
Note
Insert the fastener into the hole after ensuring that the center push-in peg is
pulled out from the fastener as shown in the illustration.
☛ ☛ ☛ ☛ 14.
Attach cover 2 and secure cover 2 to the printer with the two screws.
ZAEP681E
Fig. 4-15
☛ ☛ ☛ ☛ 15.
Turn the adjuster at the center bottom of the paper feed unit clockwise until it
touches the floor.
ZAEP100E
Fig. 4-16