Brother HL-3260N - Manual (Page 54)

1-30
✒ ✒ ✒ ✒
Note
When you set thick paper in Paper tray 2, do not stack paper above the
lower limit mark (
①) of Paper tray.
ZAEY052E
Fig. 1-27
☛ ☛ ☛ ☛ 1.
Change the lever on the paper size dial of the Paper tray 2 to the “Thick
paper” mode.
ZAEY050E
Fig. 1-28
✒ ✒ ✒ ✒
Note
If the “Thick paper” mode is selected, the following functions using Paper
tray 2 are not available.
• Duplex print
• Sort, Shift sort
• Staple
A yellow line appears under the paper size indicator on the front of the Paper
tray.
✒ ✒ ✒ ✒
Note
Reset the lever to the left side after you have finished printing on thick paper.
✒ ✒ ✒ ✒
Note
For making settings from the printer driver, see “Settings the Media from the
Printer driver” in this chapter.