Brother HL-3260N - Manual (Page 174)

CHAPTER 4 OPTIONS
4-51
☛ ☛ ☛ ☛ 1.
Confirm that the box also contains the following items.
Fig. 4-85
1. Installation Guide
2. Finisher
3. Finisher tray
4. Finisher stand
5. Output guide
6. Screw (2pieces)
7. Stopper (2pieces)
☛ ☛ ☛ ☛ 2.
Turn off the printer and remove all cables and the power cord from the
printer.
☛ ☛ ☛ ☛ 3.
Remove the adhesive tape.
1
Fig. 4-86
✒
Note
Do not remove the adhesive tape holding the Finisher and cable (
①), until
the Finisher is attached in step 10.
1
2 3
3
4
5 6