Brother HL-3260N - Manual (Page 92)

USER’S GUIDE
3-8
[Reprint the last JOB 3 times]
☛ ☛ ☛ ☛ 1.
Set the reprint function ON in the Control panel settings.
✒ ✒ ✒ ✒
Notes
If you print using this printer’s own driver, the settings for Job Spooling in the
printer driver will take priority over the settings made in the Control Panel.
For more information, see “Job Spooling” in Chapter 2.
☛ ☛ ☛ ☛ 2.
Press the Reprint switch.
Press Reprint .
--REPRINT--
COPIES= 1
If you do not make a selection
immediately, the display clears the
reprint menu automatically.
Press + until
the next
screen as
shown below
is displayed.
--REPRINT--
COPIES= 3
Press Set or
Reprint .
PRINTING
✒ ✒ ✒ ✒
Notes
If you want to reprint the data and have pressed the Go switch, the display
shows “PRESS SET TO PRINT”. Press the Set switch to start the reprint
job or press the Go switch to cancel the reprint job.