Brother HL-3260N - Manual (Page 147)

4-24
☛ ☛ ☛ ☛ 8.
Use the Allen Key to fasten the four socket screws in the order shown in the
illustration (
①-④) to secure the holder to the printer.
✒
Note
The order to fasten the screws is, top right, top left, bottom right and bottom
left as viewed from the right hand side of the printer. If the screws are not
fastened in that order, the duplex unit might not close completely or the
Multi-purpose tray might not work correctly.
ZAEP660E
Fig. 4-38
☛ ☛ ☛ ☛ 9.
Remove the small cover on the right hand side of the printer.
✒
Note
The removed small cover is no longer required.
ZAEP230E
Fig. 4-39