Brother HL-3260N - Manual (Page 160)

CHAPTER 4 OPTIONS
4-37
☛ ☛ ☛ ☛ 3.
Load the paper and adjust the paper guides to the sides of the paper.
ZAEY220E
Fig. 4-61
✒ ✒ ✒ ✒
Note
When you place paper on the Multi-purpose tray, note the following:
•
Do not stack paper over the limit mark, otherwise image skew or paper
misfeeds might occur.
•
When you set custom size or thick paper on the Multi-purpose tray, do
not stack paper above the lower limit mark of the Multi-purpose tray.
•
Shuffle the paper before setting it in the tray.
•
Check the print side of Transparencies. Some Transparencies can only
be printed on the specified side.