Brother HL-3260N - Manual (Page 175)

4-52
☛ ☛ ☛ ☛ 4.
Insert the Output guide between the Printer and the Bridge unit.
Fig. 4-87
☛ ☛ ☛ ☛ 5.
Mount the brackets of the Finisher stand by placing them in the printer and
then push it downwards slightly with catching it on the projection of the
output guide (
①).
1
Fig. 4-88
☛ ☛ ☛ ☛ 6.
Use a coin to fasten the two screws that secure the Finisher stand to the
Printer.
Fig. 4-89