Replacing the toner bottle – Brother HL-3260N User Manual
Page 191
Advertising
CHAPTER 5 MAINTENANCE
5-3
! Replacing the Toner bottle
✒
✒
✒
✒
Note
•
If the “
Toner empty
” message does not disappear after replacing
the Toner bottle, follow these instructions:
- Confirm the printer power is on.
- Leave the Front cover open for more than 10 seconds.
- Close the Front cover.
Follow these steps to change the toner bottle:
☛
☛
☛
☛ 1.
Open the Front cover.
ZAET010E
Fig. 5-2
☛
☛
☛
☛ 2.
Lift the green handle.
ZAET020E
Fig. 5-3
☛
☛
☛
☛ 3.
While pushing the green lever downwards (①), use the green handle to
slide the Toner holder out slightly (②).
ZAET021E
Fig. 5-4
Advertising